Genicom 3850 - Manual (Page 31)

27
PAP ER
STATUS FUNCTION
On Line Reverses the paper by 1/180" (one step). If you press and hold this key more than 1
sec. the paper feed speed increases. The printer (similar to turning the paper knob)
does not memorize paper reverse using this key.
Off Line Same as ON LINE function.
Menu At the non-selection level, will cycle forward through the menu structure of each
level of the menu. When you are on a "fixed" selection item, pressing this key will
decrease the value (such as 1.5 to 1.0) or change the selection (such as DRAFT to
COURIER
). When you are on a "variable" selection item, pressing this key will
decrease the value at the LCD cursor position (e. g. 5 to 4).
Power Up No action.
Tear Off Causes the paper to move down for setting a new Tear Off distance. During tear-
off, the LCD will display TEAR OFF ADJ and will decrease value as the
↓ key is
pressed. Paper will move 1/180 " with each press or will repeat if you hold down.
New dimension is saved when the
TEAR key is pressed or when tear off time-out
occurs.