Genicom 3850 User Manual
Page 71
67
Number of Data Bits
The number of data bits per character used in data transmission on the serial interface
between the printer and the host computer is determined by this parameter.
After making your selection from the list below, please make certain the host computer is set for
the same baud rate.
SER: DATA BITS
ENTER
SER:DATA BITS>8
↓
SER:DATA BITS:7
↓
Parity Enable and Type
The type of parity used in data transmission on the serial interface between the printer
and the host computer is determined by this parameter.
After making your selection from the list below, please make certain the host computer is set for
the same baud rate.
SER: PARITY TYPE
ENTER
SER:PARITY>NONE
↓
SER:PARITY:ODD
↓
SER:PARITY:EVEN
↓
SER:PARITY:MARK
↓
SER:PARITY:SPACE
↓