Genicom 3850 - Manual (Page 109)

105
Hexadecimal Dump Mode
Y : Enabling this mode causes the printer to print the hexadecimal value of each character
received.
When finished using the Hex Dump feature, it is necessary to disable it by selecting N or
by turning power off.
While in the Hex Dump mode, the printer will not respond to any control or escape codes since it
will print out the value of those codes instead.
TEST: HEX DUMP ENTER
TEST:HEXDUMP>N ↓
TEST:HEXDUMP:Y ↓
Go back to the top level of the menu with the PRIOR key and press the
↓ key to select the
next menu item (SELECT FORMAT displays).