Clearing contents of the input buffer, Selecting the test mode – Genicom 3850 User Manual
Page 107
103
Clearing Contents of the Input Buffer
Select the clear buffer function as shown below.
CLEAR BUFFER
Data received from the host and as yet unprinted will be erased (Y) or not (N) based upon
your selection. Press the
ENTER
key to go from the top level to the second level as shown
below.
CLEAR BUFFER
ENTER
CLEAR BUFFER>N
↓
CLEAR BUFFER:Y
↓
Go back to the top level of the menu with the
PRIOR
key and press the
↓ key to select the
next menu item (TEST MODE displays).
Selecting the Test Mode
Select the test modes as shown below.
TEST MODE
To select one of the three test mode selections, press the
ENTER
key to go from the top
level to the second level as shown below:
Test Pattern Width Selection
Selects between an 8.0-inch width and a 13.6-inch width.
TEST MODE
ENTER
TEST: PAPER WIDTH
ENTER
TEST:WIDTH>8.0
↓
TEST:WIDTH:13.6
↓