Genicom 3850 User Manual
Page 130
Advertising
126
6. Position the left tractor set for the printing and lock it in place moving the lever up. Adjust
gently the right tractor set to remove slack from the paper and lock it in place moving the
lever up.
Make sure the paper is not taut.
7. Close the Front tractor assemblies cover.
To select the Front2 Push paper path, press the
PATH
key until the
Front 2
led is turned on.
If paper does not load automatically, then press the
LOAD/FF
key and the LCD displays:
LOAD PAPR: FRONT2
Advertising