Genicom 3850 - Manual (Page 70)

66
Selecting Serial Interface Options
Select the serial interface options as shown below.
SERIAL OPTIONS
To change the serial interface options, press the ENTER key to go from the top level to the
second level as shown below. There are 12 options that can be specified:
Baud Rate
The data transmission rate (in bits per second) of the serial interface between the printer
and the host computer is determined by this parameter.
After making your selection from the list below, please make certain the host computer is set for
the same baud rate.
SERIAL OPTIONS ENTER
SER: BAUD RATE ENTER
SER:BAUD>9600 ↓
SER:BAUD:4800 ↓
SER:BAUD:2400 ↓
SER:BAUD:1200 ↓
SER:BAUD:600 ↓
SER:BAUD:300 ↓
SER:BAUD:38400 ↓
SER:BAUD:19200 ↓