Genicom 3850 - Manual (Page 44)

40
Selecting Character Table for an Emulation
Select a character table for emulation: EPSON, IBM or ANSI.
CHARACTER TABLE
Epson Emulation
To change the character table in the Epson emulation, press the ENTER key to go from the
top level to the second level as shown below:
CHARACTER TABLE ENTER TBL:E:ISO-3 ↓
TBL: EPSON ENTER TBL:E:ISO-4 ↓
TBL:E>CODE437 ↓ TBL:E:ISO-5 ↓
TBL:E:CODE850 ↓ TBL:E:ISO-6 ↓
TBL:E:CODE851 ↓ TBL:E:ISO-7 ↓
TBL:E:CODE852 ↓ TBL:E:ISO-8 ↓
TBL:E:CODE853 ↓ TBL:E:ISO-9 ↓
TBL:E:CODE855 ↓ TBL:E:ISO-15 ↓
TBL:E:CODE858 ↓ TBL:E:MAZOWIA ↓
TBL:E:CODE860 ↓ TBL:E:TURKISH ↓
TBL:E:CODE863 ↓ TBL:E:GREEK ↓
TBL:E:CODE864 ↓ TBL:E:ROMAN-8 ↓
TBL:E:CODE865 ↓ TBL:E:KAMENICKY ↓
TBL:E:CODE866 ↓ TBL:E CWI ↓
TBL:E:CODE867 ↓ TBL:E:IN2 ↓
TBL:E:ISO-1 ↓ TBL:E:CODE864E ↓
TBL:E:ISO-2 ↓