Genicom 3850 - Manual (Page 52)

48
ENQ Code Enable
1 : enables printer response to <ENQ> and enables type 1 download sequence.
2 : enables printer response to <ENQ> and enables type 2 download sequence.
NO : printer does not respond to <ENQ> code.
See "ANSI Emulation Commands" for additional information in the Programmer’s Manual on the
CD-Rom.
ANS: ENQ CODE ENTER
ANS:ENQ CODE>NO ↓
ANS:ENQ CODE:1 ↓
ANS:ENQ CODE:2 ↓
Superscript/Subscript Character Enable
The printer will (Y) or will not (N) respond to ESC [2 m and ESC [3 m commands.
ANS: S/SUB SCRIPT ENTER
ANS:S/SUB SC>N ↓
ANS:S/SUB SC:Y ↓
ESC+Control Code
In this setting the control codes imbedded within escape sequence are valid (Y) or ignored
(N). In both cases, the escape sequence will be valid.
ANS: ESC+CTRLCODE ENTER
ANS:ESC+CTRL>N ↓
ANS:ESC+CTRL:Y ↓