Genicom 3850 - Manual (Page 37)

33
Selecting the Initialization
This function restores all System and Operational Menu values to the factory default
settings:
NO
: no changes made.
INT : initializes all menu values to the International settings.
DOM : initializes all menu values to the US settings.
AFP
initializes all menu values of special applications.
INITIALIZE ENTER
INIT:NO ↓
INIT:INT ↓
INIT:DOM ↓
INIT:AFP ↓
Selecting the Alignment (Print Wire Flight Time)
If the currently displayed value is changed, then the flight time setting changes. Pressing
the
FORMAT key causes 3 rows of H's to be printed; the paper moves to the view position
and paper returns to the original print position when the FORMAT key is pressed. The
alignment value is stored by exiting the Initial Setup Menu by pressing the MENU key. The
alignment value is not affected by ISU. The value selected is applied to all paper paths.
ALIGNMENT ENTER ALIGN:-6 ↓
ALIGN>0 ↓ ALIGN:-5 ↓
ALIGN:1 ↓ ALIGN:-4 ↓
ALIGN:2 ↓ ALIGN:-3 ↓
ALIGN:3 ↓ ALIGN:-2 ↓
ALIGN:4 ↓ ALIGN:-1 ↓
ALIGN:5 ↓
ALIGN:6 ↓