Genicom 3850 - Manual (Page 48)

44
Compressed Character Pitch
If the printer receives a command (SI) from the host to print in compressed pitch, then the
printer will print in 17, 20 or 24 cpi.
IBM OPTIONS ENTER
IBM: COMP CHR ENTER
IBM:COMP CHR>17 ↓
IBM:COMP CHR:24 ↓
IBM:COMP CHR:20 ↓
Automatic Carriage Return
If the printer receives a command (LF) from the host to perform a line feed, then the
printer will (Y) or will not (N) append a carriage return based upon your selection.
IBM: AUTO CR ENTER
IBM:AUTO CR>N ↓
IBM:AUTO CR:Y ↓
Alternate Graphics Mode
If AGM is set to Y, the line spacing increment is 1/180 inch.
If AGM is set to N the line spacing increment is 1/216 inch.
Also the ESC* command is valid if AGM is set to Y. Line spacing commands affected by
this parameter are: ESC 3, ESC a and ESC J.
IBM: AGM MODE ENTER
IBM:AGM MODE>N ↓
IBM:AGM MODE:Y ↓
Go back to the top level of the menu with the PRIOR key and press the
↓ key to select the
next menu item (ANSI OPTIONS displays).