Genicom 3850 - Manual (Page 73)

69
DTR (Data Terminal Ready) Signal Status
FA/BU : Reflects fault and buffer status.
NONE : Never change from static state.
ONLN : Reflects online status only.
BUFF : Reflects buffer status only.
FAULT : Reflects fault status only.
ON/BU : Reflects online and buffer status.
SER: DTR STATUS ENTER
SER:DTR>FA/BU ↓
SER:DTR:NONE ↓
SER:DTR:ONLN ↓
SER:DTR:BUFF ↓
SER:DTR:FAULT ↓
SER:DTR:ON/BU ↓
RTS (Request to Send Signal) Signal Status
FA/BU : Reflects fault and buffer status.
NONE : Never change from static state.
ONLN : Reflects online status only.
BUFF : Reflects buffer status only.
FAULT : Reflects fault status only.
ON/BUF : Reflects online and buffer status.
SER: RTS STATUS ENTER
SER:RTS>FA/BU ↓
SER:RTS:NONE ↓
SER:RTS:ONLN ↓
SER:RTS:BUFF ↓
SER:RTS:FAULT ↓
SER:RTS:ON/BU ↓