Genicom 3850 - Manual (Page 133)

129
4. When the fanfold paper has been loaded
on the Front1 Push tractor assembly,
reposition the Front2 Push tractor
assembly in its initial position before
closing the Front tractor assemblies cover.
5. To select the Front1 Push paper path, press the PATH key until the Front 1 led is turned on (the
Front 2 led turns off). The paper will load automatically in the Front1 Push paper path.
If paper does not load automatically, then press the LOAD/FF key and the LCD displays:
LOAD PAPR: FRONT1