Genicom 3850 - Manual (Page 32)

28
FO RMAT
STATUS FUNCTION
On Line Same as OFF LINE.
Off Line Basically, each key depression will toggle through the stored format numbers/names in
order to allow user to simply change from one format to another.
• The first press will cause the LCD display to indicate SELECT CURRENT.
• If the key is not pressed again within 3 sec., the printer exits Format selection.
• If the key is pressed again within 3 sec., then the next format number/name will be
displayed. If the FORMAT key is not pressed again within 3 sec., then the format
displayed is loaded, all format parameter values will be updated and the printer
exits Format selection.
• If the user cycles through the formats and the last one displayed is CURRENT, then no
change will take place. If format names have been assigned, then they are displayed,
else FORMAT # x is displayed where x is the default value assigned to a format.