Genicom 3850 - Manual (Page 83)

79
Printing the Contents of the Menus
Changes to the System Menu can be listed using the print status feature. The printer
displays the message below when this item is on the top level:
PRINT STATUS
There are three different menu listings that can be obtained: SYSTEM, CONFIG and
FORMATS.
Print Status
CONFIG : This selection prints the contents of the current configuration.
FORMATS : This selection prints the contents of the current configuration and the four
formats.
SYSTEM
: This selection prints the contents of the System configuration.
PRINT STATUS ENTER
PRINT>CONFIG ↓
PRINT:FORMATS ↓
PRINT:SYSTEM ↓
Select the value and press the ENTER key. The printer will begin print the listing you have
selected as shown on the following pages.