Selecting the input buffer configuration – Genicom 3850 User Manual
Page 63
59
Selecting the Input Buffer Configuration
Select input buffer options as shown below.
BUFFER SETUP
To change the input buffer options, press the
ENTER
key to go from the top level to the
second level as shown below. There are 4 options that can be specified:
Download Buffer
Based upon the selection, the printer will (Y) or will not (N) reserve space in memory for
characters downloaded from the host in the Epson and IBM emulations.
If Y is selected, the download characters are accepted and 16 Kbytes decrease the amount
of input buffer.
If N is selected, the download characters will be printed as normal data and the input
buffer will be according to the Input Buffer size selection (see BUFF SIZE function
below).
BUFFER SETUP
ENTER
BUFF: DOWNLOAD
ENTER
BUFF:DOWNLD>N
↓
BUFF:DOWNLD:Y
↓