Selecting the character pitch – Genicom 3850 User Manual
Page 93
Advertising
89
Selecting the Character Pitch
Select the character spacing in characters per inch.
CHARS PER INCH
To change the character spacing, press the
ENTER
key to go from the top level to the
second level as shown below.
CHARS PER INCH
ENTER
CPI:24
↓
CPI>10
↓
CPI:20
↓
CPI:8.5
↓
CPI:17.1
↓
CPI:8.3
↓
(ANSI mode only)
CPI:16.7
↓
(ANSI mode only)
CPI:7.5
↓
CPI:15
↓
CPI:6
↓
CPI:12
↓
CPI:5
↓
Go back to the top level of the menu with the
PRIOR
key and press the
↓ key to select the
next menu item (PAGE SETUP displays).
Advertising