Selecting global emulation options – Genicom 3850 User Manual
Page 54
50
Selecting Global Emulation Options
Select emulation non-specific options as shown below.
OTHER OPTIONS
To change the options that pertain to all emulations, press the
ENTER
key to go from the
top level to the second level as shown below. There are 23 options that can be specified:
Automatic Line Feed
If the printer receives a command (CR) from the host to execute a carriage return, then
the printer will (Y) or will not (N) also execute a line feed based upon your selection.
OTHER OPTIONS
ENTER
OPT: AUTO LF
ENTER
OPT:AUTO LF>N
↓
OPT:AUTO LF:Y
↓
Double Line Feed
If the printer receives a command (LF) from the host to execute a line feed, then the
printer will (Y) or will not (N) also perform double line feed based upon your selection.
OPT: DOUBLE LF
ENTER
OPT:DOUBLE LF>N
↓
OPT:DOUBLE LF:Y
↓