Intel 80C188XL - Manual (Page 125)

BUS INTERFACE UNIT
3-44
Figure 3-37. Exiting HOLD
3.8 BUS CYCLE PRIORITIES
The BIU arbitrates requests for bus cycles from the Execution Unit, the integrated peripherals
(e.g., Interrupt Control Unit) and external bus masters (i.e., bus hold requests). The list below
summarizes the priorities for all bus cycle requests (from highest to lowest).
1. Instruction execution read/write following a non-pipelined effective address calculation.
2. Refresh bus cycles.
3. Bus hold request.
4. Single step interrupt vectoring sequence.
5. Non-Maskable interrupt vectoring sequence.
HLDA
CLKOUT
HOLD
1
4 3
AD15:0
DEN
RD, WR, BHE,
DT/R, S2:0,
A19:16, LOCK
5
2
NOTES:
1. THVCL : HOLD recognition setup to clock low
2. : HOLD internally synchronized
3. TCLHAV : Clock low to HLDA low
4. TCHCV : Clock high to signal active (high or low)
5. TCLAV : Clock low to signal active (high or low)
A1063-0A