Intel 80C188XL - Manual (Page 34)

2-5
OVERVIEW OF THE 80C186 FAMILY ARCHITECTURE
The data registers can be addressed by their upper or lower halves. Each data register can be used
interchangeably as a 16-bit register or two 8-bit registers. The pointer registers are always access-
ed as 16-bit values. The CPU can use data registers without constraint in most arithmetic and log-
ic operations. Arithmetic and logic operations can also use the pointer and index registers. Some
instructions use certain registers implicitly (see Table 2-1), allowing compact encoding.
The contents of the general-purpose registers are undefined following a processor reset.
2.1.4 Segment Registers
The 80C186 Modular Core family memory space is 1 Mbyte in size and divided into logical seg-
ments of up to 64 Kbytes each. The CPU has direct access to four segments at a time. The segment
registers contain the base addresses (starting locations) of these memory segments (see Figure
2-4). The CS register points to the current code segment, which contains instructions to be
fetched. The SS register points to the current stack segment, which is used for all stack operations.
The DS register points to the current data segment, which generally contains program variables.
The ES register points to the current extra segment, which is typically used for data storage. The
CS register initializes to 0FFFFH, and the SS, DS and ES registers initialize to 0000H. Programs
can access and manipulate the segment registers with several instructions.
Table 2-1. Implicit Use of General Registers
Register Operations
AX Word Multiply, Word Divide, Word I/O
AL Byte Multiply, Byte Divide, Byte I/O, Translate, Decimal Arithmetic
AH Byte Multiply, Byte Divide
BX Translate
CX String Operations, Loops
CL Variable Shift and Rotate
DX Word Multiply, Word Divide, Indirect I/O
SP Stack Operations
SI String Operations
DI String Operations