Juniper Networks MX480 - Manual (Page 161)

Slot 4 Online MPC 3D 16x 10GE
PIC 0 Online 4x 10GE(LAN) SFP+
PIC 1 Online 4x 10GE(LAN) SFP+
PIC 2 Online 4x 10GE(LAN) SFP+
PIC 3 Online 4x 10GE(LAN) SFP+
For further description of the output from the command, see the Junos OS Operational
Mode Commands.
Related
Documentation
MX480 Modular Port Concentrator (MPC) Description on page 13 •
• MX480 Modular Port Concentrator (MPC) LEDs on page 15
• Troubleshooting the MX480 MPCs on page 156
• Replacing an MX480 MPC on page 203
Maintaining MX480 MICs
Purpose For optimum router performance, verify the condition of the MICs.
Action On a regular basis:
• Check the LEDs on MIC faceplates. The meaning of the LED states differs for various
MICs. For more information, see the
MX Series 3D Universal Edge Routers Line Card Guide .
If the MPC that houses the MIC detects a MIC failure, the MPC generates an alarm
message to be sent to the Routing Engine.
• Issue the CLI show chassis fpc pic-status command. The MIC slots in an MPC are
numbered PIC 0/1 and PIC 2/3 , left to right:
user@host> show chassis fpc pic-status
Slot 0 Online DPCE 4x 10GE R EQ
PIC 0 Online 1x 10GE(LAN/WAN) EQ
PIC 1 Online 1x 10GE(LAN/WAN) EQ
PIC 2 Online 1x 10GE(LAN/WAN) EQ
PIC 3 Online 1x 10GE(LAN/WAN) EQ
Slot 1 Online DPCE 40x 1GE R EQ
PIC 0 Online 10x 1GE(LAN) EQ
PIC 1 Online 10x 1GE(LAN) EQ
PIC 2 Online 10x 1GE(LAN) EQ
PIC 3 Online 10x 1GE(LAN) EQ
Slot 2 Online MS-DPC
PIC 0 Online MS-DPC PIC
PIC 1 Online MS-DPC PIC
Slot 3 Online MPC Type 2 3D EQ
PIC 0 Online 1x 10GE XFP
PIC 1 Online 1x 10GE XFP
Slot 4 Online MPC 3D 16x 10GE
PIC 0 Online 4x 10GE(LAN) SFP+
PIC 1 Online 4x 10GE(LAN) SFP+
PIC 2 Online 4x 10GE(LAN) SFP+
PIC 3 Online 4x 10GE(LAN) SFP+
For further description of the output from the command, see the Junos OS Operational
Mode Commands.
137 Copyright © 2013, Juniper Networks, Inc.
Chapter 12: Maintaining MX480 Router Hardware Components