Juniper Networks MX480 - Manual (Page 83)

CHAPTER 4
MX480 Router Installation Overview
• Installing an MX480 Router Overview on page 59
Installing an MX480 Router Overview
To install the router:
1. Prepare the installation site.
See “MX480 Site Preparation Checklist” on page 53 .
2. Review the safety guidelines and warnings.
• General Safety Guidelines for Juniper Networks Devices on page 245
• General Safety Warnings for Juniper Networks Devices on page 246
3. Unpack the router and verify that all parts have been received.
a. See “Unpacking the MX480 Router” on page 61 .
b. See “Verifying the MX480 Router Parts Received” on page 63 .
4. Install the mounting hardware.
See “Installing the MX480 Router Mounting Hardware for a Rack or Cabinet” on
page 65 .
5. Install the router.
See “Installing the MX480 Router Using a Mechanical Lift” on page 74 .
6. Connect cables to external devices.
See “Connecting the MX480 Router to Management and Alarm Devices” on page 97 .
7. Connect the grounding cable.
See “Grounding the MX480 Router” on page 104 .
8. Connect the power cables.
• Connecting Power to an AC-Powered MX480 Router with Normal-Capacity Power
Supplies on page 105
• Connecting Power to a DC-Powered MX480 Router with Normal Capacity Power
Supplies on page 108
59 Copyright © 2013, Juniper Networks, Inc.