Juniper Networks MX480 - Manual (Page 167)

Never stack a DPC under or on top of any other component.
Related
Documentation
MX480 DPC Terminology on page 139 •
• Holding an MX480 DPC on page 140
Holding and Storing MX Series FPCs
• MX480 FPC Terminology on page 143
• Holding an MX480 FPC on page 144
• Storing an MX480 FPC on page 146
MX480 FPC Terminology
Regardless of whether you are holding an FPC vertically or horizontally, this document
uses the same terms for all four edges of the FPC (see
Figure 74 on page 143 ):
• Faceplate—Edge of the FPC that has slots into which you insert the PICs
• Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane
• Top edge—Edge at the top of the FPC when it is vertical
• Bottom edge—Edge at the bottom of the FPC when it is vertical
Figure 74: FPC Edges
g004416
Faceplate
Bottom edge
Connector
edge
Top edge
Related
Documentation
MX480 Flexible PIC Concentrator (FPC) Description on page 16 •
• Holding an MX480 FPC on page 144
143 Copyright © 2013, Juniper Networks, Inc.
Chapter 12: Maintaining MX480 Router Hardware Components