Juniper Networks MX480 - Manual (Page 165)

To hold a DPC horizontally:
1. Orient the DPC so that the faceplate faces you.
2. Grasp the top edge with your left hand and the bottom edge with your right hand.
You can rest the faceplate of the DPC against your body as you carry it.
As you carry the DPC, do not bump it against anything. DPC components are fragile.
Never hold or grasp the DPC anywhere except places that this document indicates. In
particular, never grasp the connector edge, especially at the power connector in the
corner where the connector and bottom edges meet.
Figure 72: Do Not Grasp the Connector Edge
Never carry the DPC by the faceplate with only one hand.
Do not rest any edge of a DPC directly against a hard surface (see Figure 73 on page 142 ).
Do not stack DPCs.
141 Copyright © 2013, Juniper Networks, Inc.
Chapter 12: Maintaining MX480 Router Hardware Components