Juniper Networks MX480 - Manual (Page 179)

Temperature 24 degrees C / 75 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 128 MB
Total DDR DRAM 2048 MB
Start time: 2008-12-11 16:53:24 PST
Uptime: 15 hours, 2 minutes, 47 seconds
Max Power Consumption 368 Watts
Slot 2 information:
State Online
Temperature 29 degrees C / 84 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 256 MB
Total DDR DRAM 4096 MB
Start time: 2008-12-11 16:53:18 PST
Uptime: 15 hours, 2 minutes, 53 seconds
Max Power Consumption 294 Watts
Slot 3 information:
State Online
Temperature 29 degrees C / 84 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 256 MB
Total DDR DRAM 4096 MB
Start time: 2008-12-11 16:53:18 PST
Uptime: 15 hours, 2 minutes, 53 seconds
Max Power Consumption 335 Watts
Slot 4 information:
State Online
Temperature 29 degrees C / 84 degrees F
Total CPU DRAM 1024 MB
Total RLDRAM 256 MB
Total DDR DRAM 4096 MB
Start time: 2008-12-11 16:53:18 PST
Uptime: 15 hours, 2 minutes, 53 seconds
Max Power Consumption 333 Watts
For further description of the output from the commands, see the Junos OS System
Basics Configuration Guide.
Related
Documentation
MX480 Flexible PIC Concentrator (FPC) LEDs on page 18 •
• Replacing an MX480 FPC on page 194
• Holding an MX480 FPC on page 144
• Storing an MX480 FPC on page 146
• Maintaining MX480 FPCs on page 132
Troubleshooting the MX480 PICs
Problem The PICs are not functioning normally.
Solution Check the status of each port on a PIC by looking at the LED located on the PIC
faceplate. For information about the meaning of LED states on different PICs, see the
MX Series 3D Universal Edge Routers Line Card Guide .
•
• Check the status of a PIC by issuing the show chassis fpc pic-status CLI command. The
PIC slots in the FPC are numbered from 0 through 1 , left to right:
155 Copyright © 2013, Juniper Networks, Inc.
Chapter 13: Troubleshooting MX480 Hardware Components