Holding and storing mx series dpcs, Mx480 dpc terminology – Juniper Networks MX480 User Manual

Page 163

Advertising
background image

After you clean an optical transceiver, make sure that the connector tip of the fiber-optic
cable is clean. Use only an approved alcohol-free fiber-optic cable cleaning kit, such
as the Opptex Cletop-S Fiber Cleaner. Follow the directions for the cleaning kit you
use.

Related

Documentation

Maintaining MX480 DPCs on page 130

•

•

Maintaining MX480 MPCs on page 135

•

Maintaining MX480 MICs on page 137

•

Maintaining MX480 PICs on page 134

Holding and Storing MX Series DPCs

•

MX480 DPC Terminology on page 139

•

Holding an MX480 DPC on page 140

•

Storing an MX480 DPC on page 142

MX480 DPC Terminology

Regardless of whether you are holding a DPC vertically or horizontally, this information
uses the same terms for all four edges of the DPC (see

Figure 71 on page 140

):

•

Faceplate—Edge of the DPC that has connectors into which you insert the SFP or XFP
transceivers

•

Connector edge—Edge opposite the faceplate; this edge has the connectors that attach
to the midplane

•

Top edge—Edge at the top of the DPC when it is vertical

•

Bottom edge—Edge at the bottom of the DPC when it is vertical

139

Copyright © 2013, Juniper Networks, Inc.

Chapter 12: Maintaining MX480 Router Hardware Components

Advertising