KORG C-520 - Manual (Page 10)

Control panel >
8
Control panel
MASTER VOLUME
knob:
Adjusts the vol-
ume for the speakers,
the Output and the
Phones connectors
PERFORMANCE button:
Enters/exits Performance
mode. While in this mode,
the sound selection buttons
are used to choose perfor-
mances instead of single
sounds. See page 20.
VARIATION button:
Selects one of the avail-
able variations of the cur-
rently selected sound, or
one of the three perfor-
mance banks.
SPLIT button: Turns Split mode on or off. When in
Split mode, a sound is assigned to your right hand,
and a different one to the left hand. Keep it pressed
and play a note on the keyboard to choose a differ-
ent split point. See page 17.
SOUND SELECTION buttons: Press a button to select a sound (Sin-
gle mode). You can press two buttons at the same time, to play
two sounds at the same time on the keyboard (Layer mode). Press
SPLIT to play a sound with your right hand, and a different one
with your left hand (Split mode). See page 15.
When the PERFORMANCE indicator is turned on (Performance
mode), these buttons allow for selection of performances. See
page 20.
/ (Scroll) but-
tons: Move the cursor
in the display, from
one parameter to the
following or the previ-
ous one. The cursor is
indicated by a point-
ing arrow (
) next to
a parameter’s name.
Display: Shows the vari-
ous sound names and
parameters.
Power LED
POWER switch: On/Off
switch. When in the
Standbay position, the
piano is turned off.