Lanier LP222cn - Manual (Page 153)

Preparing for Printing
34
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next >].
F
Click [Local printer], and then click [Next >].
G
Click [Add Port...].
H
Click [Standard TCP/IP], and then click [New Port...].
I
Click [Next] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
J
Enter the printer name or IP address in the [Printer Name or IP Address] box,
and then click [Next >].
When screen for Device selection appears, select “RICOH NetworkPrinter
Driver C Model”.
K
Click [Finish] in the [Add Standard TCP/IP Printer Port Wizard] dialog box.
L
Check that the name of the printer whose driver you want to install is se-
lected, and then click [Next >].
M
Change the printer name if you want, and then click [Next >].
Select the [Yes] check box to configure the printer as default.
N
Click [Next >].
O
Specify whether or not to print a test page, and then click [Next>].
P
Click [Finish].
The printer driver installation starts.
❒ A User Code can be set after the printer driver installation . For information
about User Code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows XP, Windows
Server 2003)
❒ Installing this printer driver requires Administrators permission. Log on using
an account that has Administrators permission.