Lanier LP222cn User Manual

Page 500

Advertising
background image

Troubleshooting

80

Replace Color

PCU soon

The time to replace the color
PCU is soon.

Prepare to replace the color
PCU when the message [Re-
place Color PCU]
appears on
the display.

Replace

Fusing Unit

It is time to replace the fusing
unit.

Replace the fusing unit with a
new one.

See

p.44 “Replacing the Fus-

ing Unit”

.

Replace Fusing

Unit soon

The time to replace the fusing
unit soon.

Prepare to replace the fusing
unit when the message [Re-
place Fusing Unit]
appears on
the display.

Replace

Transfer Belt

It is time to replace the transfer
belt.

Replace the transfer belt with
a new one.

See

p.51 “Replacing the Inter-

mediate Transfer Unit”

.

Replace Transfer

Belt soon

The time to replace the trans-
fer belt.

Prepare to replace the trans-
fer belt when the message
[Replace Transfer Belt] appears
on the display.

Replace Used

Toner Bottle

It is time to replace the waste
toner bottle.

Replace the waste toner bot-
tle.

See

p.32 “Replacing the

Waste Toner Bottle”

.

Reset Fusing

Unit correctly

There is no fusing unit, or the
fusing unit is not installed cor-
rectly.

Set the fusing unit correctly.

Reset Paper

Bypass Tray

There is paper left in the by-
pass tray.

Remove paper from the by-
pass tray, and then reset the
paper.

Reset PCU

correctly

XXX/XXX

The indicated photo conductor
unit(s) is/are not set correctly,
or not set.

XXX: Yellow/ Magenta/Cy-
an/Black

Set the indicated photo con-
ductor unit(s) correctly.

See

p.35 “Replacing the Pho-

to Conductor Unit”

.

Reset Toner

XXX/XXX

The indicated toner cartridge
is not set correctly.

XXX: Yellow/Magenta/Cy-
an/Black

Set the indicated toner car-
tridge(s) correctly.

See

p.28 “Replacing the Ton-

er Cartridge”

.

Reset Tray #

or Form Feed

The indicated paper input tray
is not set correctly, or not set.

Set the indicated paper input
tray correctly.

Resetting Job...

A job is being reset.

Wait a while.

ROM Update

Waiting for Data

The printer is waiting for up-
dated data.

Don't turn off the printer while
it is waiting for data.

Messages

Description

Recommended Action

Advertising