Printing the remaining sets – Lanier LP222cn User Manual
Page 222
Other Print Operations
103
B
Select the printer you want to use in the [Name] list, and then click [Prop-
erties].
The printer properties dialog box appears.
C
In the [Job type:] box, click [Sample Print].
D
In the [User ID:] box, enter a user ID using up to eight alphanumeric char-
acters.
This is used to identify the user. The user ID can be entered using up to eight
alphanumeric (a-z, A-Z, 0-9) characters.
E
Execute a command to print.
The job is saved on the hard disk.
F
Check the print job, and then use the control panel to print the remaining
sets or delete them.
p.103 “Printing the Remaining Sets”
.
p.104 “Deleting a Sample Print File”
.
Printing the Remaining Sets
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Sample Print], and then press the {#
Enter} key.
The user ID and the time when the job was stored appear.
C
Press the {U} or {T} key to display the file you want to print, and then
press the {# Enter} key.
D
Check that [Print File] is displayed, and then press the {# Enter} key.
The number of remaining sets appears.