Lanier LP222cn - Manual (Page 261)

Making Printer Settings Using the Control Panel
142
❒ Default: 1 minute
❒ When the printer switches to the Energy Saver mode, the Power indica-
tor goes off, while the Online indicator stays lit and [Energy Save Mode ]
appears.
❖ Auto Reset Time
You can set On or Off and the time for the Auto Reset Timer.
❖ Auto Reset
• On
• Off
❒ Default: On
❖ Set Time
• 10 to 999sec by 1sec.
❖ Unit of Measure
You can specify the unit of measurement in “mm” or “inch” for the custom pa-
per size.
• mm
• inch
❒ Default value is destination dependant.
❖ B&W Page Detect
Specify whether to recognize black-and-white images. Use the black-and-
white recognition function to print all monochrome pages in monochrome
mode even if color printing is specified.
• On
• Off
❒ Default: On
❖ Spool Printing
You can select whether all of the print data is spooled to the hard disk drive
before printing.
• Off
• On
❒ Default: Off