Lanier LP222cn - Manual (Page 440)

Paper and Other Media
20
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Paper Input], and then press the {#
Enter} key.
The paper type selection menu appears.
C
Press the {U} or {T} key to display [Paper Type], and then press the {# En-
ter} key.
The paper tray selection menu appears.
D
Press the {U} or {T} key to display the target paper tray, and then press
the {# Enter} key.
When the optional paper feed units are installed in the printer, [Tray 2] and
[Tray 3] appears (depending on how many units are installed).
The paper type selection menu appears.
E
Press the {U} or {T} key to display the target paper tray, and then press
the {# Enter} key.
After about two seconds, the display returns to the menu.
F
Press the {Online} key.
The initial screen appears.
The following message appears on the display:
❒ When selecting Plain Paper, select [Thin] or [Normal] for [Plain Paper] in the
[Maintenance] menu.
Loading Paper in the Bypass Tray
Specifying standard size paper for the Bypass Tray
This section explains how to load standard size paper into the bypass tray.
Menu:
Paper Input
Paper Type:
Tray 2
Tray 2:
*Plain Paper