Lanier LP222cn - Manual (Page 224)

Other Print Operations
105
❒ The latest 50 error files are stored in the error log. If a new error file is added
when there are 50 error files already stored, the oldest file is deleted. Howev-
er, if the oldest error file is a sample print file, it is not deleted, but stored in-
stead in the sample print error log until the number of sample print error files
reaches 20.
❒ If you turn off the power, the logs will be deleted.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Sample Print], and then press the {#
Enter} key.
The user ID and the time when the job was stored appear.
C
Press the {U} or {T} key to display [Error File(s)], and then press the {#
Enter} key.
D
Press the {U} or {T} key to check the log.
To print error files, either print or delete the file saved on the hard disk, and
then print the file from the computer again.
E
When you finish checking the error log, press the {Escape} key.
The Sample Print job selection screen appears.
F
Press the {Online} key.
The initial screen appears.