Lanier LP222cn - Manual (Page 162)

Preparing for Printing
43
G
Select the [Printer Name] check box to select the printer models you want
to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
H
Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
I
Click [Port:], and then click [Add].
J
Click [Network Printer], and then click [OK].
K
Double-click the computer name you want to use as a print server in the
[Browse for Printer] window.
L
Select the printer you want to use, and then click [OK].
M
Check that the port of the selected printer is displayed in [Port:].
N
Configure the User Code as necessary.
For an RPCS printer driver, a User Code can be set after the printer driver in-
stallation. For information about User Code, see the printer driver Help.
O
Select the [Default Printer] check box to configure the printer as default.
P
Click [Finish].
The printer driver installation starts.
Q
Click [Finish] in the installation completion dialog box.
A message about restarting the computer may appear. Restart the computer
to complete installation.
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run. If
you still want to install the printer driver, use [Add Printer]. See
p.70 “If a
Message Appears during Installation” .
Installing the PostScript 3 Printer Driver (Windows 95/98/Me)
❒ If you print from a print server connected to the printer using the SmartDevice-
Monitor port, the client cannot use Recovery Printing and Parallel Printing.
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.