Deleting a sample print file, Checking the error log – Lanier LP222cn User Manual
Page 223
Other Print Operations
104
To cancel printing, press the {Escape} key.
E
Press the {# Enter} key. To change the number of sets you want to print,
press the {U} or {T} key and select the number of sets, and then press
the {# Enter} key.
After the job is printed, the job saved on the hard disk is deleted.
Deleting a Sample Print File
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [Sample Print], and then press the {#
Enter} key.
C
Press the {U} or {T} key to display the file you want to delete, and then
press the {# Enter} key.
D
Press the {U} or {T} key to display [Delete File], and then press the {# En-
ter} key.
To cancel deleting a Sample Print file, press the {Escape} key.
E
Press the {# Enter} key to delete the file.
The message [Deleted] appears.
F
Press the {Online} key.
The initial screen appears.
Checking the Error Log
When a print job is not saved on the hard disk, it remains in the error log and can
be checked using the control panel.