Lanier LP222cn - Manual (Page 431)

Paper and Other Media
11
Glossy Paper
Envelopes
Printer driver setup Click [Transparency] in the [Type:] list.
Enabled paper feeding tray Bypass Tray
Number of sheets that can
be set Bypass Tray: 50
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Both-sided printing Not possible
Additional cautions • Print speed for OHP transparencies is slower than for plain pa-
per.
• Due to switching modes, the machine will be on standby for
thirty or forty seconds after the job was received.
• We recommend that you use a 4000 ANSI lumen or brighter
overhead projector to project OHP transparencies.
Printer setup Press [Paper Input] menu, [Paper Type], and then [Glossy Paper] on
the control panel.
Printer driver setup Click [Glossy] in the [Type:] list.
Enabled paper feeding tray Bypass Tray: 50
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Both-sided printing Not possible
Additional cautions Print speed is slightly slower compared to plain paper.
Printer setup Press [Paper Input] menu, [Paper Type], and then [Thick Paper 1] or
[Thick Paper 2] on the control panel.
Printer driver setup Click [Thick1] or [Thick2]in the [Type:] list.
Enabled paper feeding tray Bypass Tray: 10
❒ Make sure paper is not stacked higher than the paper guides
inside the bypass tray.
Both-sided printing Not possible