Lanier LP222cn - Manual (Page 351)

Using a Printer Server
232
The print server setting dialog box appears.
B
Select the [Notify Client of Printing] check box, and click [OK].
After print server setting is made, a dialog box appears. Confirm the dialog
box content, and click [OK].
Click [Cancel] to interrupt the procedure.
C
A dialog box appears for client setting. Click [OK].
The print server setting is complete. Each client must be set to receive print
notification.
❒ Current printing jobs restart from the beginning after the spooler pauses
briefly.
❒ When the expansion function is not used, the function is automatically set
as available.
Setting a Client
A
From the [Start] button on the task bar, point to [Program], point to [Smart-
DeviceMonitor for Client], and then click [Setting Expansion Function].
A dialog box for setting the expansion function appears.
B
Select the [Use the expansion function] check box in [Notify Printing].
C
Select the [Notify when using the print server] check box.
D
Click [OK].
The dialog box for setting the expansion function closes. The client setting is
completed.
❒ Set the printing notification function on the printer driver as well as on
SmartDeviceMonitor for Client.