Ps menu, Changing the ps menu, Ps menu parameters – Lanier LP222cn User Manual
Page 274
Making Printer Settings Using the Control Panel
155
PS Menu
You can set conditions when using Postscript for printing.
Changing the PS menu
Follow the procedure below to change the setting for data format.
A
Press the {Menu} key.
The [Menu] screen appears.
B
Press the {U} or {T} key to display [PS Menu], and then press the {# Enter}
key.
C
Press the {U} or {T} key to display [Data Format], and then press the {#
Enter} key.
D
Press the {U} or {T} key to select [TBCP], and then press the {# Enter}
key.
Wait for two seconds. The [PS Menu] screen appears.
E
Press the {Online} key.
The initial screen appears.
PS menu parameters
This section explains about parameters that can be set on the Postscript menu.
❖ Data Format
You can select the data format.
• Binary Data
• TBCP
This setting is effective when using a parallel, USB, or EtherTalk connection.