Lanier LP222cn - Manual (Page 254)

Making Printer Settings Using the Control Panel
135
❖ Color Calibrate
You can adjust the gradation of bright (highlighted parts) and medium areas
(middle parts) for printing.
❖ Start Calibr. 1
You can print gradation correction sheet 1.
❖ Start Calibr. 2
You can print gradation correction sheet 2.
❖ Reset
You can reset the gradation correction value to default.
For details, see “Correcting the Color Gradation”, Maintenance Guide.
❖ Image Density
You can select the print image density.
❖ Prt. Test Sheet
You can print the image density test sheet.
❖ Black, Cyan, Magenta, Yellow
-10 to 10
❖ Reset
Reset the image density value to default.
For details, see “Adjusting the Image Density”, Maintenance Guide.
❖ Registration
You can adjust the starting position of the printing page.
❖ Prt. Test Sheet
You can print the registration test sheet.
• Tray 2
• Tray 3
• Duplex.BackSide
❒ Only the installed trays appear on the display panel.
❖ Adjustment
You can select the start position for printing on a page.
• Horiz: Tray 2
• Horiz: Tray 3
• Horiz:Dup.Back