Lanier LP222cn - Manual (Page 375)

Mac OS Configuration
256
Mac OS X
This section explains how to configure a Mac OS X to use EtherTalk and USB.
Follow the procedure below to configure Mac OS X 10.1. If you are not using Mac
OS X 10.1, see the manual of the Mac OS X you are using for details.
❒ For Mac OS X 10.1 or higher.
❒ The PPD files are stored in the following folder on the CD-ROM.
Mac OS X:PPD Installer
Installing the PPD Files
Follow the procedure below to install a PPD file to print from Mac OS X.
❒ You need an administrator name and a password (phrase). For details, con-
sult your network administrator.
A
Insert the CD-ROM into the CD-ROM drive.
B
Double-click the CD-ROM drive icon.
C
Double-click the [Mac OS X] folder.
D
Double-click the installer icon.
E
Follow the instructions on the screen.
Setting Up the PPD File
A
Start Print Center.
B
Click [Add Printer].
Click [AppleTalk] on the first pop-up menu.
If the zone is set, select the zone from the second pop-up menu.
C
Select the PPD file for the model you are using from the [Printer Model:]
pop-up menu, and then click [Add].