Lanier LP222cn User Manual

Page 501

Advertising
background image

Troubleshooting

81

ROM Update

Receiving Data

The printer is receiving updat-
ed data.

Don't turn off the printer while
it is receiving data.

SC XXX-X

Power Off On

/ Call Service if

error reoccurs

Turn the power off and then
on. If the message appears
again, contact your sales or
service representative.

Turn the power off, and then
on. If the message appears
again, contact your sales or
service representative.

SD authenticatn.

failed

Authentication for the SD card
has failed.

Turn the power switch off and
then back on again. If the
message appears again, con-
tact your sales or service rep-
resentative.

Setting change

in process

The settings are being
changed.

Wait a while.

Set Transfr.Belt

or UsedTonerBtl.

The transfer belt or waste ton-
er bottle is not set correctly, or
not set.

Set transfer belt or waste ton-
er bottle correctly.

SSID not entered

This message appears if the
SSID has not been entered.

Enter the SSID.

Supply order

failed

Supply order has failed.

The use is required to reset
the job.

Toner is almost

empty: Black

The printer is almost out of ton-
er (Black).

Prepare to replace the toner
cartridge (Black) when the
message [Add Toner Black] ap-
pears on the display.

Toner is almost

empty: Cyan

The printer is almost out of ton-
er (Cyan).

Prepare to replace the toner
cartridge (Cyan) when the
message [Add Toner Cyan] ap-
pears on the display.

Toner is almost

empty: Magenta

The printer is almost out of ton-
er (Magenta).

Prepare to replace the toner
cartridge (Magenta) when the
message [Add Toner Magenta]
appears on the display.

Toner is almost

empty: Yellow

The printer is almost out of ton-
er (Yellow).

Prepare to replace the toner
cartridge (Yellw) when the
message [Add Toner Yellow]
appears on the display.

Update Mode Err.

Power Off On

The printer has failed to start
updating data.

Turn the printer OFF and then
back ON to restart.

Used Toner is

almost full

The waste toner bottle is al-
most full.

Prepare to replace the waste
toner bottle.

See

p.32 “Replacing the

Waste Toner Bottle”

.

Messages

Description

Recommended Action

Advertising