Lanier LP222cn - Manual (Page 163)

Preparing for Printing
44
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next].
F
Click [Network Printer], and then click [Next].
G
Click [Browse].
H
Double-click the computer name you want to use as a print server in the
[Browse for Printer] window.
I
Select the printer you want to use, and then click [OK].
J
Check the location of the selected printer is shown, and then click [Next].
K
Change the printer name if you want, and then click [Next].
Select the [Yes] check box to configure the printer as default.
L
Specify whether or not to print a test page, and then click [Finish].
M
Restart the computer.
❒ A User Code can be set after the printer driver installation. For information
about User Code, see the printer driver Help.
Installing the PostScript 3 Printer Driver (Windows 2000)
❒ Installing a printer driver requires Administrators permission. Log on using an
account that has Administrators permission.
❒ If you print from a print server connected to the printer using the SmartDevice-
Monitor port, the client cannot use Recovery Printing and Parallel Printing.
A
Quit all applications currently running.