Lanier LP222cn - Manual (Page 304)

Monitoring and Configuring the Printer
185
❖ Current interface priority configuration display
msh> dhcp priority
❖ Interface priority configuration
msh> dhcp priority “interface_name”
• You can select which interface has DHCP parameter priority.
• Priority settings are available when multiple interfaces are installed.
❖ DNS server address selection
msh> dhcp dnsaddr {dhcp | static}
• Specify whether to obtain the DNS server address from the DHCP server
or use the address set by a user.
• To obtain the DNS server address from the DHCP server, specify “dhcp”.
To use the address set by a user, specify “static”.
❖ Domain name selection
msh> dhcp domainname {dhcp | static}
• Specify whether to obtain the domain name from the DNS server or use the
domain name set by a user.
• To obtain the domain name from the DHCP server, specify “dhcp”. To use
the domain name set by a user, specify “static”.
For details about DHCP functions, see p.279 “Using DHCP” .
For details about setting the DNS server address, see p.186 “dns” .
For details about setting the domain name, see p.187 “domainname” .
diprint
The direct printing port enables direct printing from a network-connected compu-
ter.
Use the “diprint” command to change direct printing port settings.
❖ View settings
The following command displays the current direct printing port settings:
msh> diprint
Example output:
port 9100
timeout=300(sec)
bidirect on
• The “Port” specifies the port number of the direct printing port.