Lanier LP222cn - Manual (Page 178)

Preparing for Printing
59
The printer driver installation starts.
L
Click [Finish] in the installation completion dialog box.
❒ To stop installation of the selected software, click [Cancel] before installa-
tion is complete. Restart the computer and reinstall other software pro-
grams or printer drivers.
A message appears if there is a newer version of the printer driver already
installed. If there is, you cannot install the printer driver using Auto Run. If
you still want to install the printer driver, use [Add Printer]. See
p.70 “If a
Message Appears during Installation” .
Installing the PostScript 3 Printer Driver (Windows 95/98/Me)
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-ROM drive.
The installer starts.
Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
C
Select an interface language, and then click [OK].
The default interface language is English.
❒ The printer driver with the selected language will be installed. The English
printer driver is installed when the following language is selected: Cestina,
Magyar, Polski, Portugues, Suomi.
D
Click [PostScript 3 Printer Driver].
Add Printer Wizard starts.
E
Click [Next].
F
Click [Local Printer], and then click [Next].
A dialog box for selecting the printer manufacturer and model name appears.
G
Select the name of the printer whose driver you want to install, and then
click [Next].
H
In the [Available ports:] box, click [Printer Port], and then click [Next].
I
Change the printer name if you want, and then click [Next].
Select the [Yes] check box to configure the printer as default.