Lanier LP222cn - Manual (Page 268)

Making Printer Settings Using the Control Panel
149
❖ IP over 1394
You can specify whether or not to activate IP over 1394.
• Active
• Not Active
❒ Default: Active
❖ SCSI print
You can specify whether or not to activate SCSI print.
• Active
• Not Active
❒ Default: Active
❖ Bidi-SCSI print
You can specify whether or not to activate bidirectional communication for
SCSI print.
• On
• Off
❒ Default: On
❖ IEEE 802.11b
You can make settings for wireless LAN. This menu appears only when the
optional 802.11b interface unit is installed.
❖ Comm. Mode
You can select the transmission mode for IEEE 802.11b.
• 802.11 Ad hoc
• Infrastructure
• Ad hoc
❒ Default: 802.11 Ad hoc
❒ Comm. Mode can also be set using a Web Image Monitor. For details,
see Web Image Monitor Help.
❖ Channel
You can select channels: 1-13 (metric version)/1-11 (inch version).
❒ Default: 13 (metric version)/11 (inch version)