Lanier LP222cn - Manual (Page 363)

Using a Printer Server
244
U
In the [Available objects] box, click the queue you created, and then click
[OK].
V
In the [Printers] area, click the printer you assigned, and then click [Printer
Number].
W
Enter the printer number, and then click [OK]. Check the settings, and
then click [OK].
Use the same printer number specified as the remote printer number using
NIB Setup Tool.
X
Start the print server by entering the following from the console of the
NetWare server.
If the print server is in operation, quit and restart it.
❖ To exit
CAREE: unload pserver
❖ To start
CAREE: load pserver “print_server_name”