Lanier LP222cn - Manual (Page 310)

Monitoring and Configuring the Printer
191
timeout=900(sec)
auth basic
• The “timeout” setting specifies how many seconds the computer tries to
send print jobs when no connection can be made to the network printer.
• The “auth” setting indicates the user authorization mode.
❖ IPP timeout configuration
Specify how many seconds the computer waits before canceling an interrupt-
ed print job. The time can be entered between 30 to 65535 seconds.
msh> ipp timeout [30 - 65535]
❖ IPP user authorization configuration
Use IPP user authorization to restrict users to print with IPP. The default is
“off”.
msh> ipp auth {basic|digest|off}
• User authorization settings are “basic” and “digest”.
• Use “off” to remove a user's authorization.
• If user authorization is specified, register a user name. You can register up
to 10 users.
❖ IPP user configuration
Use the following command:
msh> ipp user
The following message appears:
msh> Input user number (1 to 10):
Enter the number, user name, and password.
msh> IPP user name:user1
msh> IPP password:*******
After configuring the settings, the following message appears:
User configuration changed.
netware
Use the “netware” command to configure the NetWare settings such as the print
server name or file server name.
❖ Netware Printer Server Names
msh> netware pname
• Enter the NetWare print server name using up to 47 characters.
❖ Netware File Server Names
msh> netware fname
• Enter the NetWare file server name using up to 47 characters.