Lanier LP222cn User Manual
Page 401
Appendix
282
❒ The WINS server is supported with Windows NT 4.0 Server Service Pack 4
or higher, and Windows 2000 Servers WINS Manager.
❒ For details about the WINS server settings, see Windows Help.
❒ If there is no reply from the WINS server, the NetBIOS name is registered by
broadcast.
❒ The NetBIOS name can be entered using up to 13 alphanumeric characters.
Using Web Image Monitor
A
Start a Web browser.
B
Enter “http: //(printer's address)/” in the address bar to access the print-
er whose settings you want to change.
Top Page of Web Image Monitor appears.
C
Click [Login].
The dialog box for entering the user name and password appears.
D
Enter the user name and password, and then click [OK].
Contact your network administrator for information about the settings.
E
In the left area, click [Configuration], and then click [Network].
F
Click [TCP/IP].
G
Check that [Enable] is selected for [WINS] in the [Ethernet+IEEE 802.11b] col-
umn, and then enter the WINS server IP address in [Primary WINS Server]
and [Secondary WINS Server].
❒ When installing the optional expansion 1394 board and using IP over 1394
simultaneously, perform the same operations in the [IP over 1394] column.
H
Click [Apply].
I
Quit Web Image Monitor.
Using telnet
See
p.181 “Using telnet”
.