Figure 81 isl in dedicated mode using dialup modem, Table 81 dial-up modem requirements, Figure 81 "isl in dedicated mode using – Nortel Networks NN43001-301 User Manual

Page 229: Isl hardware installation (dedicated mode)

Advertising
background image

ISL hardware installation (dedicated mode)

229

Table 81
Dial-up modem requirements

Hardware

Comments

NT8D09

500 set line card.

NTAK02

D-channel Handler Interface (DCHI) Card (for ISL
mode).

Modem

Modem capable of the following: (such as Ventel
2400-33 or 2400 Plus II)

minimum of 2400 baud

synchronous operation

modems are programmed such that one
modem originates the call while the other
auto-answers

auto dial capability

NTAK19BA

Four port break out cable.

Figure 81
ISL in dedicated mode using dialup modem

ISL hardware installation (dedicated mode)

Use

Procedure 37 "Installing ISL hardware" (page 230)

to install hardware

for an ISDN Signaling Link (ISL) in dedicated mode using dedicated
leased lines. For shared mode, hardware installation is identical to the PRI
installation found in

"1.5 Mb PRI implementation" (page 195)

, with the

addition of analog or digital TIE Trunks or both.

Nortel Communication Server 1000

ISDN Primary Rate Interface Installation and Commissioning

NN43001-301

02.03

Standard

Release 5.5

7 December 2007

Copyright © 2003-2007, Nortel Networks

.

Advertising