Nortel Networks NN43001-301 - Manual (Page 297)

QCAD128 297
• P2 Connector (I/O Panel end) - 9-pin, male, subminiature D, with
jackscrews
Table 108
NT8D7206, NT8D7207 wire list
Color
From
(pack end) To
(I/O end)
Signal
White P1-1 P2-6 XTIP (transmit)
Black P1-9 P2-7 XRING (transmit)
Green Shield nc P2-CASE P2-9 GROUND
Red P1-3 P2-2 RTIP (receive)
Black P1-11 P2-3 RRING (receive)
Red Shield nc P2-CASE P2-5 GROUND
QCAD128
This cable transports the T1 signal from the PRI pack to the I/O panel.
• Standard length - 10 ft. (3.05 m)
• Construction - 15-conductor ribbon, 28 AWG (0.321 mm), stranded
• P1 Connector - 15-pin, male, subminiature D, with jackscrews
• P2 Connector - 15-pin, male, subminiature D, with jackscrews
See Table Table 109 "QCAD128 wire list" (page 297) .
Table 109
QCAD128 wire list
From To Signal
P1-1 P2-1 XTIP (transmit tip) to telephone company
P1-2 P2-2 GND (ground)
P1-3 P2-3 RTIP (receive tip) from telephone
company
P1-4 P2-4 GND (ground)
P1-5 P2-5
P1-6 P2-6
P1-7 P2-7
P1-8 P2-8
P1-9 P2-9 XRING (transmit ring) to telephone
company
P1-10 P2-10
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301 02.03 Standard
Release 5.5 7 December 2007
Copyright © 2003-2007, Nortel Networks
.