Table 103 pad values – Nortel Networks NN43001-301 User Manual
Page 281
PRI software implementation
281
Prompt
Response
Description
XUT
r t
Analog CO trunk.
Prompted only if the 1.5/2.0 Mb Gateway feature is equipped
and TYPE=PRI2.
XEM
r t
Analog TIE trunk.
Prompted only if the 1.5/2.0 Mb Gateway feature is equipped
and TYPE=PRI2.
Table 103 "Pad values" (page 281)
shows the pads available to 2.0 Mb PRI.
Positive dB represents loss and negative dB represents gain.
Table 103
Pad values
code
0
1
2
3
4
5
6
7
value
(dB)
0.0
+1.0
+2.0
+3.0
+4.0
+5.0
+6.0
+7.0
code
8
9
10
11
12
13
14
15
value
(dB)
+8.0
+9.0
+10.0
+11.0
+12.0
+13.0
+14.0
-1
code
16
17
18
19
20
21
22
23
value
(dB)
-2
-3
-4
-5
-6
-7
-8
-9
code
24
25
26
value
(dB)
-10
idle
+0.6
Configure DPNSS1 with IP expansion cabinets/Media Gateway systems
For Small Systems, when configuring a PRI2 card slot number for DPNSS1,
the response to the DDCS prompt in LD 17 is: 1-9 (Option 11C Cabinet),
11-19 (IP expansion cabinet 1), 21-29 (IP expansion cabinet 2), 31-39 (IP
expansion cabinet 3), 41-49 (IP expansion cabinet 4).
Configure ISDN BRI trunking with IP expansion cabinets/Media Gateway
systems
For Small Systems, when configuring the MISP card slot number for ISDN
BRI trunking in LD 27, the response to the LOOP prompt is: 1-9 (Option
11C Cabinet), 11-19 (IP expansion cabinet 1), 21-29 (IP expansion cabinet
2), 31-39 (IP expansion cabinet 3), 41-49 (IP expansion cabinet 4).
For Small Systems, when configuring the DSL for ISDN BRI trunking in
LD 27, the response to the MISP prompt is: 1-9 (Option 11C Cabinet),
11-19 (IP expansion cabinet 1), 21-29 (IP expansion cabinet 2), 31-39 (IP
expansion cabinet 3), 41-49 (IP expansion cabinet 4).
Nortel Communication Server 1000
ISDN Primary Rate Interface Installation and Commissioning
NN43001-301
02.03
Standard
Release 5.5
7 December 2007
Copyright © 2003-2007, Nortel Networks
.